Assembling the gaming chairs has always been a hassle for most users. The reason for this is the lack of clear instructions mentioned in the user manual. Similarly, some parts are more difficult to compile than the rest. Materials such as armrests and gas struts can be effortlessly inserted into the system. In contrast to this, casters located at the base and backrest might take a little bit more effort on your part to completely adjust with the rest of the product.
However, the process is not as difficult as you have imagined. With proper instructions and knowledge about the required equipment, you can effortlessly assemble your apparatus into a complete unit. Furthermore, tool organization is essential and must be carried out for better efficiency. Thus, this article offers a step-by-step guide on how to assemble a gaming chair.
How to Assemble a Gaming Chair?
It is important to envision the design of your new tool before you begin the assembly. It will help you devise the plan and select the appropriate material for the purpose. In addition to this, you can also download various pictures from the website where you have purchased the product for reference. After doing so, follow these easy steps to assemble your own gaming chair.
Step 1: Unpacking and Organizing
The first step involves unpacking all the materials available in the box. Carefully analyze and monitor all the tools and try to identify their usage. You can learn more about each piece of equipment and its function through the user manual available with the product, or you can search about it on various websites.
Once you have identified all the required products, it is time to organize them. The organization will help you keep track of your components and will prevent accidental loss. It is recommended to select a wide area to perform the task. Furthermore, remember to match the available materials with those listed in the manual. In case of any missing parts, contact the manufacturer as soon as possible.
Step 2: Connecting the Main Mechanism
The second step involves the assembly of the lower section of the chair with the upper one. For this purpose, you can use screw head bolts included in the system. The screws provide adequate support to the system. Thereby keeping the materials and together and preventing them from falling. Make sure to bolt the chair tightly as it will improve the strength of the product. In order to facilitate the process, it is advised to hold the chair upside down for enhanced efficiency.
Step 3: Connecting the Armrest
After the basic frame has been attached together, it is time to connect the rest of the tools in their respective places. For this purpose, a wrench, preferably 12mm in size, can be used. Read the manual carefully before bolting the apparatus. Follow the instructions and connect the components in the specified places indicated in the manual.
Afterward, attach the armrest into holes located on the lower area of the gaming chair. Screw the tools tightly to prevent them from falling apart in the long term. However, they must not be too tight that it produces annoying noise or makes it difficult for you to move the chair.
Step 4: Integrating the Casters and Gas Strut
This step is characterized by the inclusion of casters on the base of the chair. While doing so, remember to exert some pressure to place the casters over the plastic sockets efficiently. Thereby preventing them from losing out or falling apart. Once the casters are located at the perfect spot, they will generate a clicking sound that can be used as the identification medium for the process.
Apart from casters, you should also incorporate the cover over the gas strut. Then, place the strut on the base of the chair. Read the manual for the incorporation of strut and if you still can not get it right, watch some online videos. They will help you locate the perfect spot for integration and will also provide various tips to make the process easier.
Step 5: Embedding the Head and Backrest
Last but not least, it is time to connect the head and backrest in the unit. It is not a compulsory step as most items are not available with a head or backrest attachment. However, if your model features these attachments, it is recommended to connect them. Including them in the system will provide the required support and will prevent neck aches and other back issues.
After connecting the accessories, test out whether they are comfortable and attached properly. Now, your whole product has been assembled into one complete unit. But before proceeding further, make sure to test out the durability of the tool and the strength of connecting screws. Once all these aspects have been tested, you can start using the object right away.
Important Tips
It is important to arrange the chair in a way that it becomes easier to remove the base whenever required. This is especially useful when you have to remove a certain part or more from the system. The process of base removal varies with each model, and thus, you should carefully read the instruction manual for this purpose.
However, the most common method that is compatible with the majority of the products is tipping over the chair with its back placed on the floor. It is advised to place a cloth underneath it to prevent damage. Similarly, it can also absorb the oil leaked by the system and relieves you from the hassle of cleanliness. Monitor the equipment thoroughly and identify the problematic areas. For convenience, you can also remove the casters from the base.
Troubleshoot the problem areas and resolve the issue. If the problem still persists, it is recommended to replace the damaged part. After the desired diagnostic has been carried out, you can slowly move the chair back to its original position. Remember to check the screws before you sit on the chair, as loose screws might lead to more damage and might cause severe injury to the user from falling.
Frequently Asked Questions
Is it easy to assemble a gaming chair?
Yes, it is not extremely difficult to assemble a gaming chair, especially if you have the desired apparatus and you are familiar with the function of each tool. Most people find it difficult to follow the instructions listed in the user manual. As an alternative to this, you can search on various websites and watch videos that guide easier means to assemble the apparatus together.
Do all gaming chair manufacturers and chairs work with the same assembly process?
The majority of the gaming chairs available in the market follow the same assembly process; however, there are some exceptions as well. Some complicated and high-end gaming chairs are equipped with various unique features that might require a different procedure for assembling the materials together. Thus, you should carefully monitor the system and read the instructions written on the manufacturer’s website for efficient performance.
How long does the gaming chair assembly process take?
The time taken by the whole assembly depends on the availability of the equipment alongside the abilities of the one connecting the tools together. The average time required for the assembly ranges between 30 to 40 minutes. The process can be completed in less time if ample space is available for organizing the materials together. This will allow you to access the components easily and will save the time required for finding the required objects.
What tools are required for assembling a gaming chair?
For this purpose, aside from the tools that need to be attached together, you also need several screws to aid the process. In addition to this, it is also recommended to carry a 12mm open-end wrench with you, which can help to adjust the lower portion of the chair without any difficulty. Thus, providing ease of use in the long term.
What does the knob under my chair do?
The knob located under the chair helps in the modification of tilt tension. It is often termed as a tilt tension knob and is associated with the increase and decrease in the amount required to move the chair forward and backwards. The absence of a knob and damage to it will severely limit the movement of the chair. Hence, contributing to performance inefficiency.
Wrapping Up
Assembling a gaming chair requires patience and a wide working area. Most users often create a hassle for themselves when they work in confined areas, and it becomes difficult to locate the tools. Hence, tool organization is of utmost importance. Once you have successfully organized the tools, you can create the mainframe by joining the upper and lower body of the chair.
This is followed by the inclusion of the remaining accessories in the system. Make sure to screw them tightly to prevent the system from falling apart under high pressure. However, it should not be too tight to limit your movement. Lastly, test the durability of the chair by sitting on it, and you are good to go.
You can also learn about what gaming chair does PewDiePie use here!
