Guide to Fix a Squeaky Chair & Stop Chair Squeaking

Last Update:

Squeaky chairs are big headaches whether they are a wooden chair, an office chair, or a gaming chair. They disturb your peace of mind and are highly irritating. Are you too going insane because of your squeaky office or gaming chair? Does it also make an ear-shattering squeal every time you sit on it or lean back on it? But don’t you worry, we’ve got you covered. In this article, we have remedies for your squeaky chair, either an office chair or a gaming chair. Let’s end all the squeaks and creaks of your chair.

Why The Chairs Get Squeaky

There are mainly two reasons why your office chair or a gaming chair squeak. One big reason is rust. Over time the parts of the chair get rust, such as the cylinder of the chair that lies beneath the seat and the mechanism, the armrests, the backrest or other joints, and connecting parts of the chair. With time the different parts of the chair accumulate moisture and get rusted, so that is the reason the chair starts making the irritating noise.

The other reason for your squeaky chair is either it’s poorly assembled, or some of the screws or bolts have come loose after longtime usage. Due to these reasons, the different parts of the chair rub together roughly and irregularly and make noise when you move in the chair.

You can also learn about where to buy gaming chairs here!

Find Where The Squeaking Is Coming From

Before treating the problem, find the cause of the problem. Find the exact part of the chair making the squeaky noise so that you get effective results. To do this, you can simply sit on the chair yourself and observe which part is making the noise and then afterwards treat that part directly. If you can’t figure it out this way, then ask a friend to help you. Ask him to sit on the chair, and you observe the parts of the chair. Listen carefully to the noise while sitting on the floor to figure out which portion is all this squeaky.

Check it efficiently by asking your friend to shift weight, sit, stand, and move in the chair. If you notice squeaky noise, then the problem is in the seat’s cylinder, seat, or mechanism. Next, check the armrests, place your arms on the armrest, push it backwards and see if it makes noise. Similarly, check the backrest too. The other common point that causes this problem is the connection between the backrest and the seat; sit back on your seat and observe it. Repeat this several times so that you can gauge and catch the cause of the noise.

How To Fix A Squeaky Chair

After finding out the culprit now let’s see how you can fix this issue. You need a few tools for fixing your squeaky chair. If you have these at your home, you don’t need any professional help or send back your chair to the manufacturer’s to fix it. You can simply fix the problem at home without anyone’s help. Here are some of them

  • A screwdriver
  • knife
  • plier
  • Pipe wrench
  • Lubricant

After finding the cause and preparing the tools, the next step is to work on the issue. The first step is to turn your chair upside down so that it is ready for treatment. Place it in an open and comfortable place. Flatten the back of your gaming or office chair if this option is available in your chair and simply turn it over; this will give you more access to the bottom of the chair. If your chair’s backrest doesn’t recline flat, then place it in a higher position to expose the chair’s base fully.

Remove Rust And Clean

Before going on to lubricating and tightening the parts of the chair, check that all parts are in good condition. Gaming chairs or office chairs are prone to rust as they are mainly metallic; that is why check all the parts of the chair. If you locate any rusted part, clean it immediately with a rust detergent, steel wool, a toothbrush, or remove it with the help of vinegar or a carbonated solution. Once the rust is removed, lubricate it to protect it from further rusting. Take care of your gaming chair and clean and lubricate it regularly as the parts of these chairs are very hard to replace.

Tighten The Screws And Bolts

Make sure all the bolts and screws are fastened up perfectly. The screws shouldn’t be misaligned; they should be straight at 90 degrees alignment. If you feel like they are misaligned, remove the screws, put them back in the correct alignment, and fasten them. If you see any loose screws take your screwdriver or wrench and tighten up all the screws. Tighten up the screws, which don’t look loose as well. Your office chair needs this kind of maintenance. After 5 to 6 months, the bolts come loose, so you have to check, and secularly fasten them after a while.


Once you have checked and fixed the bolts and screws, the next step is to lubricate the area from where the squeaking is coming from. For this purpose, the very common lubricant available in the market is WD-40. Get a can of this lubricant, if available at home, but if you can’t find this one, you can improvise one for yourself too. Take a spray bottle with some water and a quantity of sunflower oil or olive oil. This works as a perfect lubricant too. Spray the lubricant thoroughly in the bolts and screws of the chair.

Don’t forget to protect the surrounding fabric of the chair with some paper towels before spraying the oil on it. The grease can leave a stain on the fabric, so we must take these precautions. After covering up, take the can of WD-40, which has a small straw in front of it and is very helpful in lubricating and spraying the parts of the chair. If lubricating the bolts and screws doesn’t help, then take an additional step of unscrewing the bolts and applying oil to the inner section of the bolts. Let the sockets absorb the oil, then put the screws back and tighten them up.

Lubricating The Cylinder

If your chair cylinder is faulty and makes all the squeaky noise, then spray the nooks and crannies of the chair’s cylinder to fix the problem. Leave the chair in its upside-down position for a while, so the oil sneaks down to the barn of the cylinder and lubricates thoroughly. Oiling will help moisture the chair’s different parts and prevent them from rusting. This also increases the lifespan of the chair.

Even after lubricating the cylinder, if the problem still exists and you hear the same noise coming out of the cylinder when using the chair, then you need to lubricate the inside of the cylinder. Inside the cylinder exists a piston which can be the cause of making the squeaky noise. To lubricate the inside of the cylinder, turn the chair upside down, and at the bottom is the chair’s base where the casters are located. Right at the centre of the base and the end of the cylinder, you will locate a clip that is standard in almost all of the office chairs.

To remove this clip, you would need a knife and a plier. Raise one side of the clip with the knife. Once it raises, use the plier to plug out the clip out of the cylinder. Once the clip removes from the bottom of the cylinder, remove the washer and lift the whole base out. It will reveal the entire piston inside. As a last resort, if everything doesn’t work to fix the squeaky cylinder, this is the area you have to apply the lubrication too.

There are a series of washers in this part, too; remove them and remember their order so that you don’t mess up while putting them back. Oil the piston rigorously all around and inside the piston. Once the lubrication is done, put back all the parts you removed in their proper position and order. Put back the base, the washer, and then slide back the clip with tap first, and there you go.

Lubricating The Springs

The other central part to focus on while lubricating is the springs of the chair. If the chair’s springs are the culprit, then the chair’s backrest will make a squeaking noise every time you lean on it. The springs help you keep the balance and work as the seat’s cushion and are known as seat-tension springs. The springs make noise when it rubs with the housing ends roughly. To lubricate this is relatively easy. The spring is located inside the turning knob; loosen the turning knob to access the spring and apply oil. Oiling it will help you get rid of all the high-pitched squeals coming out of your chair.

Check The Wheels

Checking and lubricating the wheel of the chair is also very essential. This part of the chair goes through a lot of wear and tear. It holds all the load of the chair and is exposed to the ground’s dirt, debris, hairs, and everything. That is why the wheel gets wet, rusted, and squeaky very easily. Check them by turning them in all directions and see if they are the ones making these annoying noises. If yes, then clean and lubricate them to fix it. If you see that the problem is still there even after lubricating, then the solution is to change the chair’s wheel, which is quite easy.

All you have to do is get the correct pairs of wheels for the chair that matches and fits your chair’s model. Take a screwdriver plug out the old wheels out of the wheel sockets with a bit of force. Plugin the new ones, push them inside, and make sure they are fully fitted and secure in the socket. If lubricating the poorly rusted wheel doesn’t help, then changing them to a new one will definitely do the work.

Check The Chair

After oiling the chair thoroughly, sit on it again and check if the squeaking is gone or not. If you follow all the steps correctly and carefully, then it will solve your squeaky chair problem. If not, then you try oiling it again, going more deeply. The oiling will fix the problem by 90%.

Other Precautions

It is rightly said that “precaution is better than cure.” Once your chair is repaired to make sure, you don’t use it roughly. Sit on it gently, don’t jump, and throw yourself on the chair. Unnecessary swivelling and putting excess weight on the chair will make it go bad in no time. The expensive office chairs are known for the long life run, but if you don’t take care of their maintenance, even it will start squeaking, sinking, and wobbling. That is why maintenance is the key.

To Sum It Up

The tips to fix your squeaky chair boil down to cleaning the rusted part, lubricating them, and using it gently. All the information that we’ve listed above for you are very easy and time-friendly. You can do it alone with a few of the tools you can easily find in your home. We hope this article helps you with your problem.

You can also learn about how to make your speakers louder here!

Photo of author

Leave a Comment