Sectional couches offer simple and elegant living yet include relatively complex construction, which is quite challenging to dismantle. It is a household item that comes with lots of hooks, screws, nails, connectors, and much more that are often disintegrated by the users in order to move and revise the setting. The process includes different steps, from isolating the pieces to lifting the chairs and removing the connectors. Hence, this article explores a step-by-step guide on how to take apart a sectional sofa according to comfort, convenience, and different construction options.
How to Take Apart a Sectional Sofa?
Part 1: Separating the Two Parts
Remove the Pads
The first and foremost tip, while you are separating a sofa, is dismantling the pads of your sofa. One reason for this is that it disturbs the overall flow of the re-setting, and the other is that it will act as a barrier while handling the sofa. To start this step, separate these pieces and keep them safe to prevent any chances of someone falling. For some cases, these chairs come with different pads for each part, so try to remember which one is designed for each segment. You can always start by finding the handles and make your way to the end.
Find the Square Corner
While you are dismantling a sectional sofa, keep in mind that both the segments of this sofa connect at the square corner. Hence, this corner serves as an origin point of these two parts. When you disconnect this corner, the whole couch will come apart easily without any inconvenience.
Snatch the Handle on the Corner Segment
A variety of sectional couches come with soft spots that help you to lift off your handles, yet, a lip around the edges is specifically designed to lift up the sofa. Hence, you can slide your hand under this and can separate the parts easily. Still, if you don’t have a handle on the sofa, you can just find a spot and lift it up with your hand. However, based on different models, you can use different techniques that are mentioned in the manual that comes with it at the time of shopping. The main aim is to detach both segments from the square corner.
Check If you Have Separated the Two Segments
Although most of these couches come with only three pieces, including a corner and two connected segments, a large sitting sofa will include a variety of additional pieces. Hence, you will have to check each piece and observe any additional holes in the sofa connected to each other. You can also monitor these connected segments with the help of the manual that has a proper description of the construction and can easily do the process in half the time. Still, if you are unable to find the manual, you can just look it up on the internet based on the model.
Step 2: Rearranging the Sofa
Choose How You Want the Theme of Your Room
Now, once you are done dismantling the sofa, you can figure out whether you want to keep it together or want to utilize different pieces for a variety of purposes. For this task, you can choose the longest segment of your sofa for an isolated couch and a separate seating option. You can also use these small pieces like chairs and can place these around an end table for breathability and open air. On the contrary, based on your room’s theme and layout, you can easily put it together to use it like a sofa that goes well with your setting.
Trace the Connectors on the Sofa
In these sectional sofas, there are two types of connectors present, one being sliding and the other being snap connectors. The strategy of disconnecting and connecting these connectors is not similar and involves an opposite process. Hence, for this purpose, you need to check the connectors and make a decision on how you are going to join them.
Attachments for Sliding Connectors
Firstly, the sliding connectors are mostly installed in the lounge chairs and can be traced to the points from where you have disconnected the segments. It is completely effortless, and you just have to put the snare of one side into the opposite side of another. This can be done by an individual with little to minimum difficulty. For this purpose, you can call a friend or a family member just to keep the pressure away from you and can easily lift the sofa effortlessly.
Attachment for Snap Connectors
Secondly, the snap connectors are often placed under the couch with a fork on one side and a pin on the other side. You can easily find the fork of the sofa that can be removed easily from the sectional couch. To connect the snap, you just have to connect this fork on one side around the pin with the other side. When you push these forks into the pins, you will hear a snap that will suggest the process is done.
While performing these operations, it is significant to place the pins on the ground to make the pins noticeable for you, which is considered one of the best ways to meet the segments. Also, if you do not hear the sound of a snap, it means that the fork has missed the pin. Hence, you will have to do the process again until you hear the sound. In another scenario, if you are certain that the segments are connected, however, the fork is not connected, you must check again as it is most likely not in accordance with one another.
Now, Supplant the Lounge Chair Pads
After you have integrated different segments of the sofa, you can set all the pads back again. Now, almost everything is being done, and you can now make the most of your sectional sofa. Now, as mentioned above, a variety of sectional sofas come with different types of pads based on which you can adjust the pads that you have removed in the first step. Here, you will also find one unique piece of pad that doesn’t go well with any segment, this is most likely for the corner piece, and you can put it on easily.
Anatomy of the Sofa
A sofa can be defined as an upgrade or an improved version of the chair and involves a more complex construction overall. Hence, one must understand the anatomy of the sofa, including the interior and exterior of the sofa. So, to conceptualize the complexity of this product here is some of the representation of its construction.
The Exterior of the Sofa
The exterior of the sofa includes these main elements;
- Arms Panels, also known as armrests, are used to provide facilitation to users with comfort. In these sectional sofas, these are placed on both sides.
- Arms are the extensions of the arms panels, and they enhance the overall experience.
- Throw Pillows are placed on some sofas for a comfortable and pleasant experience. Moreover, these are also used for decorative purposes.
- Backrests are placed on the sofas to support the user’s backs.
- Cushion Boxings are made up of three cushions and are usually more firm than the cushions themselves.
Apart from these, you can also find the skirtings, seat cushions, couch cushions, legs, and so on.
Interior of the Sofa
The interior of the sofa includes the following;
- The frame of the sectional sofas is usually made up of wood and acts as the skeleton of the sofa.
- The Parallel Net is another portion of the wood frame and sits on it.
- Parallel Hardware is all the steel that is placed under your sofa’s interior.
- High-Density Sponge is the body of the sofa and is important to have high durability that can offer you a comfortable seating experience.
FAQs
Can all sectionals be separated?
There are a variety of options in the market when it comes to sectional sofas. Therefore, most of them are easy to dismantle and include mostly snap connectors or sliding connectors which can be separated by individuals without any inconvenience. In contrast to that, some of these sofas include nails, screws, and bolts that can be separated but need technical expertise and tools to dismantle and integrate the segments of your sectional sofa together.
How to take apart a sectional sofa?
Sectional sofas are comparatively difficult to disintegrate and often come across as a challenge for users. Hence, in most of the living room chairs, you can easily dismantle these pieces with the help of a friend or a family member. Hence, to summarize it easily, first, you need to separate the pads that can help you gain an access handle. After this, you can trace the square connector with which you can remove the connectors, and finally, based on your theme and room layout, you can adjust it.
Final Thoughts
Wrapping up, if you are considering some revisions for your settings or want to experiment with the setting, it is the foremost requirement to disintegrate the sofa. For this purpose, you will have to follow some steps from isolating the pieces, dismantling the connectors, finding the square connector, and so on. Yet, it is significant to have an idea about the model and construction of your sofa that can tell you a lot about the process. It can also help you in deciding whether to get professional help or not. Hence, this guide helps you with the overall process without any possible issues.
You can also learn about how to place a rug under a sectional sofa here!
